| PSA Parts Catalogue |
All Peugeot - Citroën Parts list
Lightweight Flywheels
All light flywheels suitable for Peugeot - Citroën
All our flywheels are made of high strength forged Chromoly steel and heat treated (Nitriding mainly) for the ultimate lasting and wear resist, especially in the weakest points - friction area and ring gear teeth.
-
Saxo / 106 OEM Set - 3.20kg
MoreSaxo / 106 Phase 1 - 1.6 16V engines with TU5J4/NFX code. For 200mm OEM clutch - 3.20kg
210600421
-
C2 / 206 OEM Set - 2.97kg
MoreC2 / 206 Phase 2 - 1.6 16V engines with TU5JP4/NFU code. For 200mm OEM clutch - 2.97kg
210600556
-
C2 / 206 Race Set - 3.80kg
MoreC2 / 206 Phase 2 - 1.6 16V engines with TU5JP4/NFU code. For 184mm racing clutch - 3.80kg. Could also be fitted
in phase 1 engines when using programmable ECU210600965
-
Saxo / 106 / C2 / 206 Race Set - 2.93kg
MoreSaxo / 106 / C2 / 206 Phase 2 - 1.6 16V engines with TU5JP4/NFU code. For 184mm racing clutch - 2.93kg. Could also be fitted
in phase 1 engines when using programmable ECU210600303
-
206 GTi / C4 2.0 16V - 3.95kg/3.20kg
More230mm/184mm ULW FW for:
206 GTi / 307 CC / C4 2.0 16V - 2.0 16V engine with EW10J4/RFR/RFN and EW10A/RFJ codes.
206 RC / 307 Feline / C4 VTS - 180cv engine with EW10J4S/RFK code.
210600372
-
306 S16 / GTi-6 / ZX 2.0 16V / Xsara VTS 2.0 16V - 3.90kg/3.20kg
More215mm/184mm ULW FW for:
306 S16 / GTi-6 / ZX 2.0 16V / Xsara VTS 2.0 16V - engine with XU10J4 code. Can also be fitted with all XU engine series, from XU5 to XU10 though it would require 215mm clutch from the above 306/ZX/Xsara
210600870
-
Citroën Sport C2 S1600 Replica - 2.55kg
MoreReplica of the Citroën Sport C2 S1600 flywheel for 184mm racing clutch, but with stronger material (forged CrMo steel) and special heat treatment (nitriding) for a longer lasting and much stronger ring gear.
210600345
-
Peugeot 207RC / 208GTI / DS3 / RCZ - 3.70kg
MorePeugeot 207RC/208GTi/DS3/RCZ with 1.6L Turbo THP engine, specific for 184mm racing clutches.
210601464
184mm Racing Clutch Kits
All 184mm Race Clutch Kits for PSA
Our 184mm single clutch kit holds +350Nm torque, though we recommend them up to 250hp/300Nm and above these figures, we recommend using the win disc version.
-
Single Disc - TU5J4/TU5JP4 - 5.90kg
MoreSingle disc clutch kit including special ultra-lightweight 2.93kg flywheel and
for 106/Saxo/206/C2 1.6 16v Phase 2 TU5J4 & TU5JP4 engines.
Clutch disc spline available: 18T x 21mm & 21T x 23.8mm(Sman
gearboxes). Other splines available to order.210600234
-
Twin Disc - TU5J4/TU5JP4 - 7.20kg
MoreTwin disc clutch kit including special ultra-lightweight 2.93kg flywheel and
for 106/Saxo/206/C2 1.6 16v Phase 2 TU5J4 & TU5JP4 engines.
Clutch disc spline available: 18T x 21mm & 21T x 23.8mm(Sman
gearboxes). for special turbo charged engine
applications, especially for drag racing use.210600234
-
Single Disc - THP with BE4 - 6.65kg
MoreSingle disc clutch kit including specific ultralight 3.7kg flywheel for
Peugeot 207RC - 1.6L Turbo THP engine with BE4 gearbox.210601727
-
Twin Disc - THP with BE4 - 7.95kg
MoreTwin disc clutch kit including specific ultralight 3.7kg flywheel for
Peugeot 207RC - 1.6L Turbo THP engine with BE4 gearbox.210601729
-
Single Disc - XU series engines - 6.15kg
MoreSingle disc clutch kit including specific ultralight 3.2kg flywheel and
for PSA with XU engine - 205, 306, 309, 405, Citroën ZX & Xsara.210601729
-
Twin Disc - XU series engines - 7.45kg
MoreTwin disc clutch kit including specific ultralight 3.2kg flywheel and
for PSA with XU engine - 205, 306, 309, 405, Citroën ZX & Xsara. Recommended for +250hp engines.210601730
-
Single Disc - EW10 series engines - 6.15kg
MoreSingle disc clutch kit including specific ultralight 3.2kg flywheel and
for PSA with XU engine - 205, 306, 309, 405, Citroën ZX & Xsara.210601716
-
Twin Disc - EW10 series engines - 7.45kg
MoreTwin disc clutch kit including specific ultralight 3.2kg flywheel and
for PSA with XU engine - 205, 306, 309, 405, Citroën ZX & Xsara. Recommended for +250hp engines.210601731
200mm Sintered Clutch Discs
200mm Sintered Clutch Discs
For OE type clutch cover only
Torsen / Gear type Limited Slip Differentials
All Torsen or Gear Type Limited Slip Differentials for MA / BE / MCM gearbox series
-
PSA MA gearbox series - 4.60kg
MoreTorsen - Gear type Limited Slip Differential for MA series gearbox.
Includes steel balls to avoid spinning and a large circlip
to avoid axial displacement.210600824
-
PSA BE gearbox series - 5.20kg
MoreTorsen - Gear type Limited Slip Differential for BE series gearbox.
Fits all BE gearboxes and include a set of special ring gear (crown wheel) bolts.
210601685
-
PSA MCM 6 speed gearbox series - 5.30kg
MoreTorsen - Gear type Limited Slip Differential for MCM series gearbox.
MCM gearboxes are commonly fitted with 1,6L THP
engines.207 RC / 208 GTi / 308 GTi / DS3 / RCZ
210601153
Plate / Clutch type Limited Slip Differentials
All Plate / Clutch Type Limited Slip Differentials for MA / BE gearbox series.
Includes a set of special ring gear (crown wheel) bolts and it is the only one to offer a package of 12 friction plates, when rest use only 8 plates, so we can assure a better traction and more stable performances during long stages or endurance races.
-
PSA MA gearbox series - 4.07kg
MoreOur MA plate type LSD is the only one to offer 10 friction plates where the rest of the manufacturers only use 8, so we can ensure better traction and more stable performance during long stages or endurance races. This LSD requires our specific bolt-on short ratio final drive, which is available in different ratios as shown below.
210601341
-
PSA BE gearbox series - 4.60kg
MoreIncludes a set of special ring gear (crown wheel) bolts and it is the only one to offer a package of 12 friction plates,
when rest use only 8 plates, so we can assure a better traction and more stable performances during long stages or
endurance races.210601339
-
PSA MCM 6 speed gearbox series - 4.25kg
MorePlate - Clutch type Limited Slip Differential for MCM series gearbox.
MCM gearboxes are commonly fitted with 1,6L THP engines.
207 RC / 208 GTi / 308 GTi / DS3 / RCZ
210601653
Short Ratio Final Drives
All Short Ratio Final Drives for MA / BE gearbox series.
And all Circlip & Thread systems
-
-
PSA MA gearbox - 4.62 - 13x60
MorePressure type crown
Ratio 4.62 - 13x60
For Circlip & Thread system
210600549
-
-
PSA MA gearbox - 5.67 - 12x68
MorePressure type crown
Ratio 5.67 - 12x68
For Circlip & Thread system
210601128
-
PSA MA gearbox - 4.28 - 14x60 - Specific
MoreBolt on type crown - specific for our plate type LSD
Ratio 4.28 - 14x60
For Circlip & Thread system
210601014
-
PSA MA gearbox - 4.92 - 13x64 - Specific
MoreBolt on type crown - specific for our plate type LSD
Ratio 4.92 - 13x64
For Circlip & Thread system
210600226
-
PSA MA gearbox - 5.67 - 12x68 - Specific
MoreBolt on type crown - specific for our plate type LSD
Ratio 5.67 - 12x68 - Light Weight crown wheel
For Circlip & Thread system
210601270
-
-
PSA BE3 5 speed gearbox - 5.66 - 12x68
MoreBolt on type crown
Ratio 5.66 - 12x68
Light Weight crown wheel
210600472
-
PSA BE4S / BE3 Mk2 gearbox - 5.08 - 12x61
MoreBolt on type crown
Ratio 5.08 - 12x61
For BE4S & BE3 Mk2
210600047
-
-
PSA BE4R gearbox - 5.67 - 12x68
MoreBolt on type crown
Ratio 5.67 - 12x68
Light Weight crown wheel
210600475
-
PSA BE3 6 speed gearbox - 5.67 - 12x68
MoreBolt on type crown
Ratio 5.67 - 12x68
Light Weight crown wheel
210600470
Close Ratio Gear Kits
All Close Ratio Gears Kits for MA / BE gearbox series.
-
Close Ratio Gear set - C550 / C550p
MoreStraight cut sincromesh gear for Citroën C1 / Peugeot 107
2.78 / 1.91 / 1.47 / 1.20 / 1.06
Include special antifriction treatment for better shifting and longer synchro rings lasting.
210601043
-
FIA Close Ratio Gear set - MA
MoreStraight cut sincromesh gear
3.41 / 2.35 / 1.80 / 1.46 / 1.20
Include special antifriction treatment for better shifting and longer synchro rings lasting.
210600259
-
Close Ratio Gear set - BE4
MoreStraight cut sincromesh gear
2.88 / 2.13 / 1.70 / 1.42 / 1.23
Includes special antifriction treatment, internal spline and needle bearing (3rd gear only) for better lubrication and longer life.
Designed to work with OE final drive ratios.
210601130
-
Gearbox Casing - BE
MoreSpecial 5th gear aluminium casing
for BE gearboxes.All bolts includes
210600885
-
Small Syncro ring - MA
MoreCopper alloy synchro ring -large IDfor Peugeot-Citroen MA gearboxes.
For 1st & 2nd gears
210601196
-
Large Syncro ring - MA
MoreCopper alloy synchro ring - small IDfor Peugeot-Citroen MA gearboxes.
For 3rd, 4th & 5th gears
210601197
Adjustable Camshaft Pulley
All our adjustable pulleys are made of hard anodized AL6061 T6 offering a very strong surface for the ultimate lasting and wear resistance.
-
PSA TU/XU 8V line engines
MoreTU 8V line - TU9 / TU1 / TU2 / TU3 / TU5
XU 8V line - XU5 / XU7 / XU9 / XU10
278grs
210600619
-
-
-
-
ULW Wheel Hub
We have developed an ultralight weight version of 1.05kg made of high strength
Chromoly alloy steel and special heat treatment (induction hardening) for an extra strength.
This noticeable unsprung weight reduction compared to the Saxo Challenge ones helps to improve vehicle´s handling
and acceleration.